Weinzierl Engineering GmbH
System solutions for the KNX standard
Items 1 - 50 of 71
The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke and additionally provides an output for auxiliary power.
The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke and additionally provides an output for auxiliary power.
Out of stock
bidirectional connection between a PC and the KNX installation bus
The KNX USB Interface 312 is a data interface between a PC or laptop and the KNX installation bus. It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames.
Out of stock
bidirectional connection between a PC or Laptop and the installation bus KNX (TP)
Out of stock
bidirectional connection between a PC or Laptop and the installation bus KNX (TP)
In stock
The KNX USB Stick 332 is a data interface between a PC or laptop and the KNX installation bus. It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames.
Top
The KNX USB Stick 332 is a data interface between a PC or laptop and the KNX installation bus. It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames.
The KNX ENO 626 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus.
Unidirectional gateway between EnOcean radio devices and the KNX/EIB bus
bidirectional gateway between EnOcean radio devices and the KNX bus
bidirectional gateway between EnOcean radio devices and the KNX/EIB bus
The KNX ENO 636 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus.
Out of stock
Interface for accessing the KNX/EIB via IP. This device can be used in ETS3 and ETS4 as a programming interface
Top
The KNX IP Interface 731 is the successor of the well-tried KNX IP Interface 730. The new compact design has a width of only 1 module (18 mm) and is powered by the KNX bus.
Out of stock
WLAN interface to the KNX/EIB bus
Out of stock
Forwards telegrams between different lines via LAN (IP) as a fast backbone
The KNX IP Interface 751 is the successor of the well-tried KNX IP Router 750. The new compact design has a width of only 1 module (18 mm) and is powered by the KNX bus.
Out of stock
Combines the essential functions of a KNX bus line: Power supply with choke, IP Router and IP Interface
The KNX IP LineMaster 762 combines the central functions of a KNX bus line in a compact device (6TE): a 640 mA bus power supply with inductor, IP router and IP interface.
The KNX IP LineMaster 762 combines the central functions of a KNX bus line in a compact device (6TE): a 640 mA bus power supply with inductor, IP router and IP interface.
Out of stock
Interface to connect to KNX/EIB both on telegram level (KNXnet/IP Tunneling) and on data-point level (KNX Application Layer)
Out of stock
Interface to connect to KNX/EIB both on telegram level (KNXnet/IP Tunneling) and on data-point level (KNX Application Layer)
The KNX IP BAOS 773 is used as Interface for connecting to KNX both on telegram level (KNXnet/IP Tunneling) and on data point level (KNX Application Layer). Clients can directly access Group Objects via either a Binary Protocol (over TCP/IP or UDP/IP) or via JSON (Java Script Object Notation) Web Services. The device is configured with the ETS and supports up to 250 Group Objects.
The KNX IP BAOS 774 is used as Interface for connecting to KNX both on telegram level (KNXnet/IP Tunneling) and on data point level (KNX Application Layer). Clients can directly access Group Objects via either a Binary Protocol (over TCP/IP or UDP/IP) or via JSON (Java Script Object Notation) Web Services.
Top
simple integration solution for non-KNX devices. Designed as a RS-232 interface, the KNX Serial BAOS 870 uses the proven FT1.2 protocol (PEI 10) as message format and can thus be used as a programming interface for the ETS
The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke and additionally provides an output for auxiliary power.
The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke and additionally provides an output for auxiliary power.
The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke and additionally provides an output for auxiliary power.
Top
The Weinzierl KNX BAOS Modules are a powerful solution for KNX connectivity on a compact circuit board at low costs. They are targeted at manufacturers who want to integrate existing or new products into the KNX system as full compliant devices with complete support of the ETS software.
The KNX USB Stick 332 is a data interface between a PC or laptop and the KNX installation bus. It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames.
The KNX IO 410 (4I) is a compact binary input with 4 channels to control lights, shutter etc. The inputs can be connected to conventional switches with an external voltage of 12 to 230 V. Using as impulse counter is possible as well. Two push buttons and three LEDs allow a local operation and a visualization of the device state.
The KNX IO 411 (4Ii) is a compact binary input with 4 channels to control lights, shutter etc. with conventional switches or contacts. Inputs are designed for dry contacts.
Out of stock
The KNX IO 510 (2O) is a compact switching actuator with 2 bi-stable relay outputs. The actuator provides the function for universal outputs including scene control, timer, staircase lightning and to control heating valves (PWM for thermoelectric valve drives).
Top
The KNX IO 510 (2O) is a compact switching actuator with 2 bi-stable relay outputs. The actuator provides the function for universal outputs including scene control, timer, staircase lightning and to control heating valves (PWM for thermoelectric valve drives).
Out of stock
The KNX IO 511 (1O2I) is a compact switching actuator with 1 bi-stable output and 2 binary inputs. The actuator provides the function for universal outputs including scene control, timer, staircase lighting and heating valves (PWM for thermoelectric valve drives).
The KNX IO 511 (1O2I) is a compact switching actuator with 1 bi-stable output and 2 binary inputs. The actuator provides the function for universal outputs including scene control, timer, staircase lighting and heating valves (PWM for thermoelectric valve drives).
The KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked.
The KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked.
The KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked.
The KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked.
The KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked.
The KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked.
Top
The KNX IP BAOS 777 is the logical continuation of the proven KNX IP BAOS series including the KNX IP BAOS 771 and 772. The device is based on a completely newly developed platform with a new design.
The KNX USB Stick 332 is a data interface between a PC or laptop and the KNX installation bus. It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames.
Top
The KNX IP BAOS 777 is the logical continuation of the proven KNX IP BAOS series including the KNX IP BAOS 771 and 772. The device is based on a completely newly developed platform with a new design.
The KNX USB Stick 332 is a data interface between a PC or laptop and the KNX installation bus. It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames.
The KNX USB Stick 332 is a data interface between a PC or laptop and the KNX installation bus. It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames.
The KNX USB Stick 332 is a data interface between a PC or laptop and the KNX installation bus. It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames.
The KNX IO 511 (1O2I) is a compact switching actuator with 1 bi-stable output and 2 binary inputs. The actuator provides the function for universal outputs including scene control, timer, staircase lighting and heating valves (PWM for thermoelectric valve drives).
Items 1 - 50 of 71